|
Part 1. The first priority work that must be done before passing
technical control.
- Replace the left rubber support of the motor (done)
- The headlights didn't switch on, fixed now.
- Test the breaks, possibly change the breaking pads (done)
- Replace the rubber cover on one of the steering
axes (done)
- Clean the carburetor (done)
- Tune the carburetor (done)
- Change the front tyres (done)
- Change the oil and oil filter (done)
- Replaced the spark plugs
- Replace the distributor (done)
- Replace the air filter (done)
Part 2. Important work that is not critical for technical control.
- Repair the rusty metal patch on the body under the driver's
door (done though it is yet to be painted)
- Clean and repair the rusty spots near the right back wheel (done)
- Clear the rust on the silencer and protect that place
(done)
- Repair the bampers (rear repaired but yet to be painted,
front replaced but to be painted too)
- Replace the radiator grill
- Replace the front left turning light (done)
- Clean the suspension, protect from rust and paint
Part 3. The work of secondary priority.
- Repair the bumps on the body and capote (done)
- Repair the shelf in the trunk
- Repair/change the seats (done)
- Install electric windows (and mirrors if possible)
- Install central electric lock
Part 4. Further improvements once the car is usable.
- Custom painting of the car
- Modify the dashboard
- Replace the steering wheel (done)
- Improve the noise protection
- Replace the carpet floor (done)
- Change the door and wall panels (done on 1 side)
- Install the sound system
- Improve the lighting and the ventilation of the cabin
|
